7
English
4. Move the paper lever to the released position.
5. Hold the both sides of the paper, and load the
paper in the paper insertion slot.
6. Pull the paper until it hangs down over the
paper tray.
Note:
If thin paper is loaded, press the Paper Feed
button to decrease the value of paper suction. If
thick and curled paper is loaded, press the Paper
Feed button to increase the value of paper
suction.
7. Hold both the fixed and movable flanges, and
rewind the paper to the line marked with an
arrow mark.
8. Move the paper lever to the secured position.
The printer automatically feeds the paper to
the printing position.
9. Close the roll paper cover.
10. Raise the roll paper support.
To Next Page
Loading...
