Setting Up Your System for Network Printing 25
6. Enter the printer’s IP address, shown on the network status sheet, in the
Printer Name or IP Address text box. Then click Next.
Note:
If you get the IP address from the printer’s control panel, be sure to omit any
leading zeros when entering it in the screen above. Example: 192.168.010.193
should be entered 192.168.10.193.
7. On the next screen, click Finish.
Note:
If the finish screen does not appear, the IP address may be incorrect or there may
not be a good Ethernet connection. Check the IP address and the status light on
the printer.
You can now use the printer on your network.
To Next Page
Loading...
