24 Setting Up Your System for Network Printing
Adding the Network Port
After installing the printer software on your computer, you need to add the
network port. See the appropriate section below for your operating system.
Windows
1. Click Start or , click Control Panel, and then click View Devices and
Printers (Windows 7), Printer or Printers (Windows Vista), or Printers
and Faxes (Windows XP).
2. Right-click Epson Stylus Pro 4900 and select Printer Properties or
Properties.
3. Click the Ports tab, then click Add Port.
4. Select Standard TCP/IP Port, then click the New Port button.
5. When the printer port wizard opens, click Next.
To Next Page
Loading...
