The Control Panel 162
2. Select a menu.
Press the Paper Feed d button or Paper Feed u button to
select a desired menu.
3. Set the menu.
Press the Menu r button to set the selected menu. The first
item appears on the LCD panel.
4. Select an item.
Press the Paper Feed d button or Paper Feed u button to
select a desired item.
5. Set the item.
Press the Menu r button to enter the selected item. The first
parameter appears on the LCD panel.
6. Select a parameter.
Press the Paper Feed d button or Paper Feed u button to
select a parameter for the item.
7. Set the parameter.
Press the Menu r button to store the selected parameter. If
the parameter is for execution only, press the Enter
button
to execute the function for the item.
8. Exit Menu mode.
Press the Pause
button. The printer returns to the READY
state.
To Next Page
Loading...
