Paper Handling 228
Using Cut Sheet Media
Loading cut sheet media
To load cut sheet media longer than A3 or Legal, see the next
section. To load A4, Letter or 8 × 10 inch cut sheet media, see
“Loading cut sheet with a size of A4, Letter or 8 x 10 inches” on
page 232.
If you are printing on thick paper (0.5 to 1.5 mm), see “Printing
on thick paper (0.5 to 1.5 mm)” on page 234.
Loading cut sheet media longer than A3 or Legal
To load cut sheet media longer than A3 or Legal, follow the steps
below.
c
Caution:
As much as possible, keep your fingers off the printable surface of
the media, as fingerprints may reduce printout quality.
1. Make sure that the printer is on and the roll paper cover is
closed.
2. Press the Paper Source l button repeatedly until Sheet
appears.
To Next Page
Loading...
