Epson Stylus Pro 7450 - Page 187

The Control Panel 187
EPSON Stylus Pro 9880/9880C/7880/7880C:
EPSON Stylus Pro 9450/7450:
10. After printing is finished, the pattern number and current set
number are displayed. Select the set that has the smallest gaps,
and then press the Paper Feed d button or Paper Feed u
button to display the number for that set.
11. Press the Enter
button to register the set number. The next
pattern number appears. Then repeat step 10.
If you are not satisfied with the result of this alignment, press
the Paper Source l button to return to the previous level,
and then select BI-D ALL.
If you are not satisfied with the result of the BI-D ALL
alignment, try UNI-D.
12. After you set the patterns, press the Pause
button to return
to the READY state.
VLm
123456789
Lc
123456789