Paper Handling 208
❏ Adjust the feed strength by pressing the Paper Feed
buttons on the control panel. When using thick, heavy, or
curled paper, press the Paper Feed u button to increase
the power. When using thin or light paper, press the
Paper Feed d button to decrease the power.
❏ If the paper does not come out even after you execute the
procedure above, open the front cover and then pull the
paper out manually.
6. Holding the bottom edge of the paper, turn the roll paper to
remove the slack. Make sure that the bottom edge of the paper
is straight, and that it is aligned with the horizontal line.
Note:
You do not have to align the right end of the paper with the vertical
line.
To Next Page
Loading...
