Paper Handling 218
Winding paper forward
When you want paper wound onto the take-up reel core with the
print on the outside, set the take-up reel unit to wind paper
forward. Follow the steps below.
1. Attach the three paper guides packaged with the Auto
Take-up Reel Unit, taking care to space them evenly.
2. Make sure that the roll paper is loaded in the printer properly.
For instructions, see “Loading roll paper” on page 206.
3. Press the Paper Source l button to select Roll Auto Cut Off
.
4.
Press the Paper Feed d button on the printer to advance the
roll paper.
To Next Page
Loading...
