Paper Handling 224
Taking-up your prints
When the Auto Take-up Reel Unit is installed, and the take up
reel core is loaded with paper to take-up in the desired direction,
you can use the unit to take up your prints.
w
Warning:
❏ Do not touch the Auto Take-up Reel Unit while it is
operating. Doing so may result in injury.
❏ Do not look directly at the sensor beam. Doing so may cause
permanent eye damage.
c
Caution:
During operation, be sure to stay out of the sensor detection area.
Interrupting the sensor beam can cause paper to be taken up under
tension and adversely affect printing.
Light
detector
Light
emitter
Light detector sensor
detection area
To Next Page
Loading...
