Problem Solver 293
CARRIAGE
LOCKED
RELEASE THE
CARRIAGE LOCK
The print head is locked. Remove the metal
plate on the left side of
the print head to
release the print head.
PRINTER ERROR
RESTART THE
PRINTER
An error has occurred. Restart the printer by
pressing the Power
button.
SERVICE CALL
ERROR
nnnnnnnn
The print head is locked. Remove the metal
plate on the left side of
the print head to
release the print head.
A fatal error has
occurred.
Turn the printer off,
leave it for a while, and
then turn the printer on
again. If this message
appears on the LCD
panel again, note the
code and then contact
your dealer. See
“Contacting Customer
Support” on page 316.
To Next Page
Loading...
