Problem Solver 314
5. Close the front cover, if necessary, then press the Power
button to turn the printer off and back on.
6. Make sure that the Paper check light is on and PAPER OUT.
LOAD PAPER is displayed on the LCD panel. To load the paper,
see “Using Roll Paper” on page 201 or “Using Cut Sheet
Media” on page 228.
If you do not resume printing afterwards, make sure the print
heads are in the home (far right) position. If not, turn the printer
on, wait until the print heads move to the home position, then
turn off the printer.
c
Caution:
If the print heads are not left in the home position, print quality
may decline.
To Next Page
Loading...
