6
You see the ColorBurst RIP Print Server name in the printer list.
12. Close the Print & Fax window or the Printer Setup Utility. You’re ready
to print to the ColorBurst RIP.
Windows Clients Printing to a Windows RIP Server
ColorBurst supports 32-bit versions of Windows Vista,
®
XP, and 2000.
Other versions of Windows, including 64-bit versions, are not supported.
Note: Make sure the ColorBurst RIP is shared on the server.
1. Make sure the network is set up and the ColorBurst RIP is running.
2. Windows Vista: Click
> Control Panel > Hardware and Sound >
Printers
.
Windows XP: Click
Start > Control Panel > Printers and Other
Hardware > Printers and Faxes
.
Windows 2000: Click
Start > Settings > Printers
.
3. Windows Vista: Click the
Add a Printer
button.
Windows XP or 2000: Double-click the
Add Printer
icon, then click
Next
.
4. Select the
Network
option, then click
Next
.
5. Windows Vista: You see a list of printers. Select the ColorBurst RIP
printer, then click
Next
.
Colorburst.fm Page 6 Wednesday, November 21, 2007 7:05 PM
To Next Page
Loading...
