Menu Command Reference
Print Job Menu
Except where noted, these commands operate on the selected job in the Pre-Print
Queue or Post-Print Queue.
Hold Job
This command prevents the selected job in the Pre-Print
Release Job
Print Job
Remove Job
Reprint Job
Print Job On
Queue from being printed. The job hold status is indicated
by an
H to the left of the job name. The currently printing
job cannot be held; rather, you must pause or cancel it to
stop printing immediately.
If dimmed, the selected job is already held.
Any
jobs in the Pre-Print Queue are still printed in order.
This command unblocks a previously held job. If dimmed,
the
selected job is not held.
This command releases and prints the selected held job in
the Pre-Print
Queue. If dimmed, another job is already
printing.
This command removes the selected job from the queue.
To remove a currently printing job, you must first cancel it.
This command moves the selected job from the Post-Print
Queue to the Pre-Print Queue and starts printing it.
This command displays a dialog
used to modify informa-
tion about the selected job. You must specify
a PowerRIP
printer on which the job should be printed as well as a
copy count, then click on OK.
Which printer do you want the Job printed on?
port-print
rrtril
max
Copies:
a
[
Cancel
1
Birmy Graphics Corporation
29
To Next Page
Loading...
