PowerRlP
Manual
Faster Copies
When checked, pages are ripped to a spooled image file on
disk before being sent to the imaging device. For multiple
copies, pages are only ripped once, then output multiple
times. However, the spooled image file uses a large amount
of disk space; therefore, you should use this option with
caution.
When unchecked, pages are rendered directly to the imag-
ing device.
Serial Port
Use this radio cluster to select whether the EPSON Stylus
is connected to the printer port or modem port.
Collate
Copies
This selection is “grayed out”-all multiple page jobs will
be collated if more than one copy is requested.
Printer Setup With Epson’s Optional LocalTalk or
Ethertalk Interface Board
Printer Name
If you have installed the EPSON optional LocalTalk inter-
face board in your EPSON Stylus and you have selected an
AppleTalk printer, the Setup screen will display Printer
Name. Refer to the EPSON Stylus User’s Guide to assign a
name to your printer.
Printer Name: ,
Use the EPSON Namer
to name your printer
and type that exact
name here. If the
Printer Name does not
agree, PowerRIP will
not find the the net-
worked printer.
IxI
Purge printed jobs after
1
41 hours
v
f
q
Lfmft
post-print queue to
-1
jobs
0
OPI
Image
Substitutfons
0
Black Background
0
Faster Copies
gj
Collrrte
CODISS
1
I
Cancel
1
36
Birmy Graphics Corporation
To Next Page
Loading...
