Epson Stylus SX415 - 1.6 Control Panel Overview

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A
PRODUCT DESCRIPTION Control Panel 27
Confidential
1.6 Control Panel
1.6.1 Operation Buttons & LEDs
 NX510 series
Figure 1-5. NX510 series Control Panel
Table 1-30. NX510 series Buttons & LEDs
Button/LED Function
Button
Power Turns the power ON/OFF.
Start Starts printing.
Stop/Clear
• Stops operation and displays the menu screen.
• Stops printing and ejects paper.
• Returns the print settings in the current mode to their default
and displays the Top screen. (Returns to the previous screen
during printing maintaining the current settings)
Setup
Goes to the Setup mode that provides maintenance menu (head
cleaning, head alignment, etc.) and various setting menu.
Display/Crop
• Goes to the zoom setting screen for the selected image.
• Changes the image preview layout on the LCD.
Menu Goes to the print setting menu screen.
OK Accepts the changed settings
Back Cancels the previous operation.
Cross Key
(Up/Down/Left/Right)
Selects a menu item or a setting value.
+
Sets the number of copies.
-
Copy Goes to the stand alone Copy mode.
Memory Card Goes to the memory card direct print mode.
Photo Goes to the Photo mode. (Repeat printing)
Scan Goes to the Scan mode.
LED
Power (Green)
• Flashes at power ON/OFF.
• Flashes during some sequence is in progress.
• Flashes when an fatal error occurs.
WiFi (Green) • Flashes when wireless LAN connected
Card Access
(Green)
• Lights when a memory card is inserted.
• Flashes when a memory card is being identified or accessed.
Power button
Start button
Stop/Clear button
Copy button
Memory Card button
Scan button
Display/Crop button
Setup button
- button
Menu button
Back button
+ button
LCD
Power LED
Cross key and OK button
Note : The Card Access LED is provided near the memory card slot.
WiFi LED
Photo button