Epson Stylus SX415 - Procedural Differences between the Models

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A
DISASSEMBLY/ASSEMBLY Overview 95
Confidential
4.1.4 Procedural Differences between the Models
This chapter describes the disassembling/reassembling procedures based on NX510 series. As for some parts/components; however, the procedures differ between each model.
Refer to the following table to confirm the differences and the reference.
Table 4-3. Differences between Models
Item Difference NX510 series SX410 series SX210 series Reference*
Panel Unit
Disassembling/reassembling
procedures
(The shape of the Panel Units
differs.)
 NX510 series
“ 4.4.2 Panel Unit/LCD Unit ” (p108)
 SX410 series
“ 4.7.2 Panel Unit/LCD Unit (SX410 series) ” (p148)
 SX210 series
“ 4.8.2 Panel Unit/LCD Unit (SX210 series) ” (p155)
Printhead
Disassembling/reassembling
procedures
(The Printheads differ.)
 NX510 series
“ 4.5.1 Printhead ” (p113)
 SX410 series
“ 4.7.3 Printhead (SX410 series) ” (p150)
 SX210 series
“ 4.8.3 Printhead (SX210 series) ” (p158)
Main Board Unit
Disassembling/reassembling
procedures
(The shape and the connector
locations differ.)
 NX510 series
“ 4.4.1 Main Board Unit ” (p105)
 SX410 series
“ 4.7.1 Main Board Unit (SX410 series) ” (p146)
 SX210 series
“ 4.8.1 Main Board Unit (SX210 series) ” (p154)
Cover Open
Sensor
Existence of Cover Open
Sensor
Yes No No
“ 4.5.4 Removing the Printer Mechanism (Lower Housing) ”
(p117)
Wireless LAN
Board
Existence of Wireless LAN
Board
Yes No No
“ 4.4.1 Main Board Unit ” (p105)
Scanner Carriage
FFC
Existence of Ferrite core No Yes No
“ 4.3.4 Scanner Unit/Hinge ” (p100)
Left Frame Existence of Ferrite core Yes No No
“ 4.5.5 Left Frame ” (p119)