129
Setting Options Description
Firmware Update Update Select Start Checking to access
the Epson website and search for
a firmware update. The printer
must be connected to the
internet. Follow the prompts to
update the firmware, which can
take up to 5 minutes.
Caution: Do not turn off or
unplug the printer during a
firmware update or you may
damage the printer.
Notification Select On to allow the printer to
automatically check for new
firmware; a message is displayed
on the LCD screen if new
firmware is found
Parent topic: Using the Control Panel Menus
Related tasks
Setting a Password and Locking the Control Panel
Maintenance Menu
Select Settings > Maintenance to run nozzle checks, cleaning cycles, and other maintenance
operations.
Caution: Follow the instructions in the topic links below the table to use these menu settings correctly.
Setting Description
Print Quality Adjustment Perform when there are streaks in printouts, ruled lines are
duplicated, or text is blurred
Print Head Nozzle Check Prints a nozzle check pattern so you can check for clogged
nozzles
Head Cleaning Perform if the nozzle check pattern has faint or missing areas
To Next Page
Loading...
