131
Related references
Supported Document Sizes and Types
Using a Carrier Sheet
You can load thin or fragile originals in the scanner using a carrier sheet (not included). Make sure the
original meets the loading specifications before scanning it.
Note: If you are using a carrier sheet, the product cannot automatically detect the size of the original. If
you are copying the original, set the Original Size setting to the size of your original. If you are scanning
the original, set the Scan Size and Top Offset settings.
1. Insert the original into the carrier sheet with the printed side facing the transparent sheet. Align the
top edge of the original with the top of the carrier sheet (A) and align the side of the original with the
alignment mark (B).
To Next Page
Loading...
