228
Nothing Prints
If you have sent a print job and nothing prints, try these solutions:
• Make sure your printer is turned on.
• Make sure there are no errors on the screen.
• If you have Print Preview enabled in your printer driver, the preview appears after you click Print but
before printing starts. Disable this setting if you want printing to start immediately.
• Make sure any interface cables are connected securely at both ends. If you have a spare cable, try
connecting with the spare cable.
• Check the model and specifications of the interface cable to see if the cable is appropriate for your
computer and printer.
• If you connected your printer to a USB hub, make sure it is a first-tier hub. If it still does not print,
connect your printer directly to your computer instead of the hub.
• Make sure the USB hub is recognized correctly on the computer. Disconnect all USB hubs from the
computer and connect the printer directly to the computer's USB port.
• Make sure the USB cable length does not exceed 10 feet (3 m).
Parent topic: Solving Printing Problems
Related references
Interface Specifications
Print Head Moves But Nothing Prints
If the print head is moving and nothing prints, try these solutions:
• Print a nozzle check pattern. If the pattern does not print correctly, clean the print head again. (If the
printer has not been used for a long time the nozzles may be clogged.)
• If you see the message Motor self adjustment running on the product's LCD screen, the printer is
adjusting its internal motor. Wait a few moments for the message to disappear and do not turn off the
printer.
Parent topic: Solving Printing Problems
Related concepts
Print Head Nozzle Check
Print Head Cleaning
To Next Page
Loading...
