190
Cleaning the Print Head Using the Product Control Panel
Cleaning the Print Head Using a Computer Utility
Using the Powerful Cleaning Utility
Parent topic: Print Head Maintenance
Cleaning the Print Head Using the Product Control Panel
You can clean the print head using the control panel on your product.
1. Make sure roll paper or cut sheet paper is loaded in the printer.
2. Press the home button, if necessary.
3. Select Settings > Maintenance > Head Cleaning.
You see a screen like this:
4. Select Start to begin the cleaning cycle.
When the cleaning cycle is finished, the power light stops flashing and a confirmation screen
appears.
Caution: Never open any covers or turn off the product during a cleaning cycle or you may damage
it.
5. Select Yes to print a nozzle check pattern.
The nozzle pattern prints.
To Next Page
Loading...
