201
Maintenance and Transportation
See the instructions in these sections to maintain your printer for optimum results, or to move or
transport your printer.
Replacing the Cutter
Replacing the Borderless Pads
Cleaning the Platen and Borderless Pad Edges
Cleaning the Integrated Scanner (SureColor T5470M)
Moving or Transporting Your Product
Replacing the Cutter
If you notice that your paper does not cut cleanly, you may need to replace the cutter. You will need a
Phillips-head screwdriver.
Caution: Do not remove the protective material from the new cutter until instructed to do so. Do not drop
the cutter or knock it against anything or you may chip the blade.
1. Remove all paper from the printer.
2. Press the home button, if necessary.
3. Select Settings > Maintenance > Replace Cutter > Start.
The cutter moves to the replacement position.
To Next Page
Loading...
