139
You see a screen like this:
5. Select Add Entry.
6. Select Add Contact.
7. Do one of the following:
• To create a contact for scanning to email, select Email.
• To create a location for scanning to a network folder or FTP, select Network Folder/FTP.
8. Select the number you want to use for the contact you are adding.
9. Select the Name field. Use the on-screen keyboard to enter the contact name (up to 30 characters)
and select OK.
10. Select the Index Word field. Use the on-screen keyboard to enter a word to use when searching for
an entry (up to 30 characters) and select OK. (This field is optional.)
11. Do one of the following:
• For an email contact, select the Email Address field. Use the on-screen keyboard to enter the
address and select OK.
• For a network folder or FTP location, select the Communication Mode field and select Network
Folder (SMB) or FTP. Then select the Location field, use the on-screen keyboard to enter the
location, and select OK. Enter other information if necessary.
To Next Page
Loading...
