164
Setting Options Description
Page Margins option Clip By Margins Adds the value selected for the page margin
inside the hard clip area of the PS command
of the data, or the size selected for the base
output size
Oversize Adds the value selected for the page margin
outside the hard clip area of the PS command
of the data (when Auto is selected)
Adds the value selected for the page margin
outside the size selected for the base output
size (when set to a standard size)
Page Margin 3 mm
5 mm
Select the top, bottom, left, and right margin
values for roll paper
Note: Margins are 3 mm for cut sheets
regardless of the setting.
Smoothing On
Off
Select On to print at the maximum resolution
for the selected paper type
Note: This may result in longer printing time
or insufficient memory errors.
Base Output Size Various options When Auto (the default setting) is selected,
the hard clip area of the PS command of the
data becomes the base output size
Select User-Defined when printing in a
custom size
Resolution Standard
300 dpi
600 dpi
1200 dpi
Selects the print resolution; when Standard
(the default setting) is selected, available
resolutions depend on the selected paper type
To Next Page
Loading...
