5
!CAUTION:
❏
Do not use this product in locations subject to high humidity or dust levels. Excessive humidity
and dust may cause paper jams and other problems, such as fire, or electric shock.
❏
Be sure to set this product on a firm, stable, horizontal surface. The product may break or cause
injury if it falls.
❏
Do not stand on or place heavy objects on top of this product. Equipment may fall or collapse,
causing breakage and possible injury.
❏
The print head can be very hot during and immediately after printing. If you need to touch it, such
as for cleaning, wait until it cools down. Touching it before that may cause burns.
❏
Do not connect a telephone line to the drawer kick connector. There is a risk of the telephone line
or product being damaged.
❏
To ensure safety, unplug this product before leaving it for an extended period.
❏
Take care not to injure your fingers on the manual cutter
• When you remove printed paper
• When you perform other operations such as loading/replacing roll paper
Caution Labels
The caution labels on the product indicate the following precautions.
!KCAUTION:
The thermal head can be very hot during printing and immediately after printing. Touching it may
cause burns.
!CAUTION:
When connecting external devices to the USB ports, follow the precautions below.
❏
Confirm the rated current of the external devices by checking the descriptions on the devices or
manuals. Connect the external devices only when those total rated current is less than 600 mA.
Do not use a device whose rated current is unclear.
❏
Use UL-approved external devices (only for North American users).