Epson TM-m30II-NT User Manual

116
Appendix
Bluetooth Low Energy Technology Advertising
Introduction
When you connect the BT820 from Lairedtec to the USB A connector on the TM-m30II-NT and turn it on, the
Bluetooth low energy technology Advertising Packet is transmitted. By default, the TM-m30II-NT transmits the
packet according to the iBeacon Format from Apple. You can also change the data that is transmitted by
following the steps in "Changing the Bluetooth Low Energy Technology Advertising Packet" on page 117.
Glossary:
Dongle specifications
Manufacturer: Laird Tech
Model name: BT-820
For setting methods and settings, see the TM-m30II Utility User's Manual.
Procedure
When you install the Bluetooth adapter, the printer is restarted and then the adapter is enabled.
When you uninstall the Bluetooth adapter, the printer is restarted and then the adapter is disabled.
The USB-A – Device Charging port is disabled.
If the printer is capable of Bluetooth communication, the Bluetooth function is disabled.
Bluetooth Low Energy Technology Advertising Packet Format
In the TM-m30II-NT, the iBeacon format is used by default for the Bluetooth low energy technology Advertis-
ing Packet.
The UUID for the TM-m30II-NT is "fac1ba2f-61a2-4d83-9a8c-60087c232569".
Term Description
Bluetooth Low Energy Technology Advertising The name of this function.
Bluetooth Low Energy Technology Advertising
Packet
The data sent by this function from the printer.
Bluetooth adapter The BT820 from Laird Tech.
A USB dongle to connect to the USB Type A connector.
iBeacon The format stipulated by Apple for Bluetooth low energy
technology Advertising Packets
When using the default settings for the TM-m30II-NT (Bluetooth
adapter installed in the printer and the printer is on), the Bluetooth
low energy technology Advertising Packet is transmitted in
iBeacon format.

Epson TM-m30II-NT Specifications

General

Type	POS printer
Character sets	ANK
Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Built-in barcodes	-
Country of origin	Philippines
Mounting position	Horizontal/Vertical
Autocutter durability	2.2 million cuts
Card reader integrated	Yes
Compatible memory cards	MicroSD (TransFlash)
Built-in sensors details	Paper End Sensor, Papier-Sensor
Sound pressure level (printing)	55 dB
Mean time between failures (MTBF)	360000 h
Product color	White
Power plug type	Type C
Power source type	AC
Maximum roll diameter	83 mm
Supported paper width	58 mm - 80 mm (Breite) mm
USB connector	USB Type-A / USB Type-B
Serial interface	No
USB 2.0 ports quantity	2
Connectivity technology	Wired
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	5 - 45 °C
Operating relative humidity (H-H)	10 - 90 %
Package depth	240 mm
Package width	195 mm
Package height	235 mm
Package weight	2382 g
Quantity per pack	1 pc(s)
Print head life	150.000.000 Impulse
Mean cycles between failures (MCBF)	65000000
Quantity per pallet	128 pc(s)
Quantity per pallet (UK)	192 pc(s)
Master (outer) case width	400 mm
Master (outer) case height	255 mm
Master (outer) case length	490 mm
Master (outer) case weight	0 g
Harmonized System (HS) code	84433210
Quantity per master (outer) case	4 pc(s)

Weight and Dimensions

Width	127 mm