22
Chapter 1 Product Overview
Network Connection Status
O: OFF N: ON F: Flashing -: Ignore the LED light
* The LED flashing pattern is: lighting for 320 ms followed by a pause for 320 ms.
Error Status
There are three possible error types: automatically recoverable errors, recoverable errors, and unrecoverable
errors.
Automatically Recoverable Errors
• Head temperature error The printer recovers from the error when the head
temperature drops.
• Cover open error (in the middle of printing) The printer recovers from the error when the roll paper
cover is closed.
• TM-Intelligent function error The printer recovers from the error when the printer
settings are corrected.
Recoverable Errors
• Autocutter error An error occurs if the cutter is locked due to fallen foreign material or
similar cause. Although automatic recovery is performed even if there
is only slight locking, if automatic recovery is not performed, remove
foreign material and paper jams, and close the roll paper cover to
perform recovery.
Power
LED
Error
LED
Paper
LED
Wi-Fi
LED
Ethernet
LED
Bluetooth
LED
Printer Status
NOON O -Connecting via Wi-Fi
NOOF O - Wi-Fi (An IP address has not been
acquired)
NOOO N - Connecting via Ethernet
NOOO F - Ethernet (An IP address has not been
acquired)
NOOF F -Starting the network firmware
NOOO O - Not connected to a network
Instead of closing the roll paper cover, you can make the printer recover from the error using a
dedicated command, however, doing so will cause the printer to go offline due to a cover open
error.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
