Epson TM-m30II-NT

53
Chapter 3 Advanced Usage
Main connection interface
• Auto (interface that receives data first) (initial setting)
• USB
• Ethernet/Wi-Fi
• No main connection I/F
Autocutting after closing cover
• Cuts (initial setting)
• Does not cut
Paper reduction
Extra upper space reduction
• Disabled (initial setting)
• Enabled
Extra lower space reduction
• Disabled (initial setting)
• Enabled
Line space reduction rate
• Not reduced (initial setting)
• 25%
• 50%
• 75%
Line feed reduction rate
• Not reduced (initial setting)
• 25%
• 50%
• 75%
• When using this printer with multiple interfaces, make sure the interface that is always
connected to be set as the main connection.
• When using multiple interfaces, set the receive buffer capacity to 4 KB.
• You cannot use wired LAN and wireless LAN at the same time.
• The displayed items vary depending on the interface configuration.
• For information about the function, see "Printing Using Multiple Interfaces" on page 28.