Epson TM P60 - Setting Using a Web Browser; Operation

A-28 Wireless LAN Setup Detailed Information Rev. B
A.3 Setting Using a Web Browser
The TM-P60 with Peeler has a function to change settings from a PC on which TMNetWinConfig
isn't installed by using a browser such as Internet Explorer.
Note:
Be sure to use Microsoft Internet Explorer 5.0 or later.
A.3.1 Operation
Note:
Set your Web browser so that it does not use a proxy server.
1. Start Windows Internet Explorer (or your Web browser).
2. Input the IP address of the TM-P60 with Peeler in the browser address bar and press Enter
(Ex. http://192.168.192.168).
Note:
You can confirm the IP address by printing a status sheet. See “Status sheet printing” on page 3-4 for
details.
3. The browser displays a dialog box requesting a user name and password. Enter your
username and password.
Note:
If you are using the default settings of the TM-P60 with Peeler, click OK without entering a user
name or password. If a password is required, you have to contact the Administrator of your wireless
LAN. When you wish to reset the printer to the default setting, see “Resetting the printer” on page 3-
5.