Rev. B Wireless LAN Setup Detailed Information A-25
TM-P60 with Peeler Technical Reference Guide
❏ Advanced Settings button
The Wireless Advanced Settings dialog is displayed; set the following detailed items.
❏ Advanced Settings
❏ Power Management Setting
Note:
When using the TM-P60 with Peeler in the Ad-Hoc mode, this function is disabled.
It depends on Access point whether using this function is possible or impossible.
Item Explanation
Transmission Rate Select one of the following: Automatic/1Mbps/2Mabps/5.5Mbps/
11Mbps.
Authentication
Method
Set either Shared key or Open System.
Item Explanation
Set power
management
Select Disable/Enable of Power management.
To Next Page
Loading...
