Epson TM P60 - Page 108

A-36 Wireless LAN Setup Detailed Information Rev. B
TCP/IP
Click the TCP/IP, the screen below is displayed. Set the TCP/IP.
❏ TCP/IP Setting
• SUBMIT button Click this button after changing the setting contents to
send the setting contents to the TM-P60 with Peeler.
Note:
The “Set Using PING“ is changed to “disabled“ automaticaly after the IP address is defined by it.
Item Explanation
Get IP Address Select either Auto /Manual.
Set using Automatic
Private IP Addressing
(APIPA)
Select the ON/OFF of the APIPA (Automatic Private IP Addressing)
function.
Set Using PING Select the ON/OFF of the IP address setting by PING.
IP Address Set the IP Address.
Subnet Mask Set the Subnet Mask.
Default Gateway Set the Default Gateway.