A-10 Wireless LAN Setup Detailed Information Rev. B
3. Click the printer for which you want to set the IP address, and then click the Configuration
button. (You might have to wait for 10 seconds or more to view the TM-P60 with Peeler over
the network on your screen.)
Note:
If you have connected more than one printer to the network and do not know for which printer you want to
set the IP address, you can check the printer by finding out the MAC address of the TM-P60 with Peeler.
The MAC address can be found on the status sheet. For printing the status sheet, refer to “Status sheet
printing” on page 3-4.
To Next Page
Loading...
