Epson TM P60 - Page 90

A-18 Wireless LAN Setup Detailed Information Rev. B
Search Options - COM
Specify the Searching COM port to match a TM-P60 with Peeler connected by an RS-232C cable.
Note:
The TM-P60 with Peeler supports only the baud rates 9600, 19200, and 384000. When you specify
another baud rate with the utility, the utility can’t communicate with the TM-P60 with Peeler.
Item Explanation
Port Set the COM port number.The COM port numbers that can be used are
1 through 256.
Baud Rate (bps)
(See note below.)
Set the baudrate.The baud rate that can be set is one of the following:
9600/14400/19200/38400/56000/57600/115200.
Parity Set the parity. Set either No Parity, ODD or EVEN.
Flow Control Set the flow control. Set either NONE, RTS/CTS, or DTR/DSR.