66
Appendix
Environmental Conditions
Temperature/
Humidity
Operating 5 to 45°C {41 to 113°F}, 10 to 90% RH
(See the operating environment range below.)
Storage -10 to 50°C {14 to 122°F}, 10 to 90% RH (except for paper)
Vibration
resistance
When
packed
Frequency: 5 to 55 Hz
Acceleration: Approximately 19.6 m/s
2
{2 G}
Sweep: 10 minutes (half cycle)
Time: 1 hour
Orientation: x, y, and z
There is no external or internal visible damage and the unit operates normally after
being subjected to vibration.
Impact
resistance
When
packed
Packing: Epson standard package specifications
Height: 90 cm {35.43"}
Orientation: 1 corner, 3 edges, and 6 surfaces
There is no external or internal visible damage and the unit operates normally after
being dropped.
When
unpacked
Height: 5 cm {1.97"}
Orientation: Lift one edge and release it (for all 4 edges)
There is no external or internal visible damage and the unit operates normally after
being dropped while not operating.
Acoustic noise (operating) Approx. 55 dB (bystander position)
Note: The values above are measured in the Epson evaluation condition.
Acoustic noise differs depending on the paper used, printing contents, and the setting
values, such as print speed or print density.
Relative
humidity
Operating
environment
range
Ambient temperature
10
20
40
60
80
90
0
0 1020304050
[%RH]
34°C, 90%
40°C, 65%
45°C, 50%
[°C]
To Next Page
Loading...
Need help?
General
