Rev. A iii
UB-E02 Technical Reference Guide
About This Guide
This guide is intended to provide all information necessary for system planning, design,
installation and application of the UB-E02 for designers and developers of POS systems.
Contents of the Guide
The configuration of the guide is as follows:
Related Documents
Chapter 1, “System Preparation” Supported operating system, network
protocols, TM printers, and other limitations.
Chapter 2, “Installation” Gives information on how to install and use the
UB-E02.
Chapter 3, “Utilities” Gives information on how to use the utilities.
Chapter 4, “Programming Samples” Includes practical programming information.
Chapter 5, “Specification” Gives specifications.
Appendix A, “Definitions” Provides definitions of terms used in this guide.
Software/document name Description
UB-E02 User’s Manual Provides instructions for operators of POS systems in which the
UB-E02 is installed so that the operators can use the UB-E02 safely
and correctly.
To Next Page
Loading...
