Epson UB-E02 - 03-0011 Forced Transmission; 03-0012 Reset

Rev. A 4-9 Programming Samples
UB-E02 Technical Reference Guide
4.7.4 03-0011 Forced Transmission
Transmission is done, regardless of the flow control between the TM printer and the UB-E02.
4.7.4.1 Set-up data
4.7.4.2 Reply data
4.7.5 03-0012 Reset
4.7.5.1 Set-up data
4.7.5.2 Reply data
❏ To reset the printer, the reset function should be enabled by a DIP switch of the printer.
❏ The UB-E02 is also reset when the printer is reset.
❏ After resetting, wait for approximately 10 seconds before accessing to the UB-E02, which is
the same as when turning on the power.
Off-set Size Description
14 1 Flow control
0: With flow control
1: No flow control (forced transmission)
15 2 Data length (n: maximum: 255)
17 n Data length (maximum: 255)
Off-set Size Description
14 1 Result
0: Normal
Except for 0: Failure
15 2 Data length
17 n Data string
Off-set Size Description
14 1 Reserved (undefined)
Off-set Size Description
14 1 Result
0: Normal
Except for 0: Failure