3 Status Indicates the status for detected projectors as shown below.
Available.
Standby
Available. When you click Connect, the
computer currently connected is
disconnected and your computer is
connected.
Busy
Cannot be selected. Disable interrupt
connection is set on another computer that
is already connected.
Busy (Disable
interrupt connection)
The projector's Configuration menu is open.
You can select it after closing the
Configuration menu and running the search
Currently in use by
again.
another application
Displayed while running Manual search or
searching with a profile.
Searching
Displayed when a projector cannot be found
as a result of Manual search or search with a
profile.
Not found.
Available. Displayed when a projector with
security settings enabled is found in Quick
Connection Mode.
Not acquired
4 Projector name Displays the projector's name.
5 Update list (Quick Updates Status and Signal intensity.
Connection Mode only)
6 Disable interrupt Select to prevent an interrupt connection by other computers while
connection connected to the selected projector.
84