Epson WF-3825 - SSL;TLS Communication with the Printer

Related Information
& “Application for Conguring Printer Operations (Web Cong)” on page 269
Deleting a CA
Certicate
You can delete the imported CA Certicate.
1.
Access Web Cong and then select the Network Security tab > CA Certicate.
2.
Click Delete next to the CA Certicate that you want to delete.
3.
Conrm that you want to delete the certicate in the message displayed.
4.
Click Reboot Network, and then check that the deleted CA
Certicate
is not listed on the updated screen.
Related Information
& “Application for Conguring Printer Operations (Web Cong)” on page 269
SSL/TLS Communication with the Printer
When the server certicate is set using SSL/TLS (Secure Sockets Layer/Transport Layer Security) communication
to the printer, you can encrypt the communication path between computers. Do this if you want to prevent remote
and unauthorized access.
Conguring Basic SSL/TLS Settings
If the printer supports the HTTPS server feature, you can use an SSL/TLS communication to encrypt
communications. You can congure and manage the printer using Web Cong while ensuring security.
Congure encryption strength and redirect feature.
1.
Access Web Cong and select the Network Security tab > SSL/TLS > Basic.
2.
Select a value for each item.
❏ Encryption Strength
Select the level of encryption strength.
❏ Redirect HTTP to HTTPS
Redirect to HTTPS when HTTP is accessed.
3.
Click Next.
A conrmation message is displayed.
4.
Click OK.
e printer is updated.
Administrator Information > Advanced Security Settings > SSL/TLS Communication with the Printer
369