Epson WF-3825 - Page 76

2.
Select Memory Device on the home screen.
3.
Select TIFF.
4.
Select the le, and then proceed to the next screen.
5.
Tap
x .
TIFF Settings
You can make print settings for TIFF format les in you memory devices.
:
Changes the order of the les.
Paper Setting:
Specify the paper source settings which you want to print on.
Layout:
Select how to layout the Multi-TIFF le. Borderless is for printing one page per sheet without margins
around the edges.
e
image is enlarged a little to remove borders from the edges of the paper. With
Border is for printing one page per sheet with margins around the edges. 20-up is for printing 20 pages
on one sheet. Index is for making index printing with information.
Fit Frame:
Select On to crop the photo to t into the selected photo layout automatically. If the aspect ratio of the
image data and the paper size is dierent, the image is automatically enlarged or reduced so that the
short sides match the short sides of the paper. e long side of the image is cropped if it extends beyond
the long side of the paper. is feature may not work for panorama photos.
Quality:
Select High for higher quality printing, but the printing speed may be slower.
Date:
Select the format of the date the photo was taken or saved. e date is not printed for some layouts.
Clear All Settings:
Resets all settings to their defaults.
(Print Order):
Select the order for printing multi-page TIFF
les.
Color Mode:
Select a color setting whether you normally print in B&W or Color.
Printing > Printing Photos > Printing TIFF Files from a Memory Device
76