Epson WF-5690 - Aligning the Print Head Using the Product Control Panel

Aligning the Print Head Using the Product Control Panel
Aligning the Print Head Using a Computer Utility
Parent topic: Adjusting Print Quality
Aligning the Print Head Using the Product Control Panel
You can align the print head using the control panel on your product.
1. Make sure there are no errors on the LCD screen.
2. Load a few sheets of plain paper in the cassette (or in cassette 1 if your product has two cassettes).
3. Press the home button, if necessary.
4. Select Setup.
5. Select Maintenance.
You see a screen like this:
6. Select Print Head Alignment.
272