1. Press the home button, if necessary.
2. Select Setup .
You see a screen like this:
3. Scroll down and select System Administration . Enter the administrator password, if necessary.
You see a screen like this:
4. Select Printer Settings .
5. Select the Paper Source Settings options you want to use.
6. Select one of these Auto Error Resolver options:
• Turn on this setting to display a warning and print on one side of paper only when a 2-sided
printing error occurs, or to print the data that the printer could process when a memory full error
occurs.
• Turn off this setting to display an error message and stop printing if an error occurs.
70
To Next Page
Loading...
