14
Copying a Document
6. Adjust the density (make the copies lighter or darker) if necessary.
7. To change copy settings, press x and select
Paper and Copy Settings
. The
Layout
setting
should be
With Border
and the
Paper Size
should be
Letter
.
■ To print on both sides of the page, select
2-Sided Printing
, then select
On
.
■ To adjust the copy size, select
Reduce/Enlarge
, then choose
Actual Size
(to print at actual size),
Custom Size
(to select a percentage),
Auto Fit
Page
(to automatically size the image to fit your paper), or one of the
specific sizes listed.
■ For the
Paper Type
setting, select
Plain Paper
.
■ For the
Paper Source
setting, select the cassette you want to use. To
make a large number of copies and use paper from both cassettes, select
Cassette 1 then 2
.
■ To change the copy quality, select
Quality
, then choose
Draft
,
Standard
Quality
, or
Best
.
Note:
To clear previously used copy settings, press C. For more information about copy
settings, see your online User’s Guide.
8. After you finish selecting your settings, press
OK
.
9. Press x to begin copying. To cancel copying, press
C
.
Note:
When printing two-sided, if ink on the front of the paper smears, select a longer Dry
Time in the Paper and Copy Settings menu.
To Next Page
Loading...
