Epson WorkForce 840 - Setting up Additional Computers

Wireless Network Setup 41
Entering Your SSID Manually
If your network doesn’t broadcast its name (SSID), follow these steps to enter it:
1. Press if necessary and select
Setup . Select Network Settings , then
Wireless LAN Setup , then Setup Wizard .
2. From the Select SSID screen on the touch panel, press l or r to select
Other
SSIDs
.
Important:
Network names are case-sensitive. Be sure to enter uppercase letters (ABC) or
lowercase letters (abc) correctly.
■ Press x to switch between uppercase (ABC),
lowercase (abc), or numbers and special characters
(123).
■ Press u or d until you see the character you want.
■ Press l or r to move to the cursor.
■ Press – to delete a character.
3. When you’re done entering your network name, press
OK .
4. Continue with step 3 on page 40 to enter your network password.
Setting Up Additional Computers
1. Make sure your product is turned on.
2. Insert the product software CD.
3. Windows 7 and Windows Vista: If you see the AutoPlay window, click
Run
Setup.exe
. When you see the User Account Control screen, click Yes or
Continue .
Windows XP: When you see the Software Installation screen, continue with
step 4.
Mac OS X: Double-click the
Epson icon.