Epson WorkForce AL-M300 Series - Interfaces; Parallel Interface (for AL-M300 D Only); USB Interface

EMC Directive 2004/108/EC EN 55022 Class B
EN 55024
EN 61000-3-2
EN 61000-3-3
Indication of the manufacturer and the importer in accordance with requirements of
directive 2011/65/EU (RoHS)
Manufacturer: SEIKO EPSON CORPORATION
Address: 3-5, Owa 3-chome, Suwa-shi, Nagano-ken 392-8502 Japan
Telephone: 81-266-52-3131
Importer: EPSON EUROPE B.V.
Address: Azië building, Atlas ArenA, Hoogoorddreef 5, 1101 BA Amsterdam
Zuidoost The Netherlands
Telephone: 31-20-314-5000
Interfaces
Parallel Interface (For AL-M300D only)
Use the IEEE 1284-B compliant parallel interface connector.
ECP mode/Nibble mode
USB interface
Hi-Speed USB - Compatible with the USB 2.0 Specification
Note:
❏ Your computer must support Hi-Speed USB or USB in order to use Hi-Speed USB or USB as the
interface to connect your computer to the printer.
❏ Since Hi-Speed USB is fully compatible with USB, USB can be used as an interface.
AL-M300/AL-M400 Series User's Guide
Technical Specifications (AL-M300 Series) 202