34
You see a screen like this:
4. Select Basic Settings.
5. Select Power Off Timer, then select a time period between 30minutes and 12h (12 hours).
Parent topic: Using Power Saving Settings
Accessing the Web Config Utility
You can select your product's network settings and confirm its operating status using a web browser.
You do this by accessing your product's built-in Web Config utility from a computer or other device that is
connected to the same network as your product.
1. Print a network status sheet.
2. Locate the IP address for your product that is listed on the network status sheet.
3. On a computer or other device connected to the same network as your product, open a web
browser.
4. Enter your product's IP address into the address bar.
You see the available Web Config utility options.
Parent topic: Product Basics
Related tasks
Printing a Network Status Sheet
To Next Page
Loading...
