Epson WorkForce Pro WF-4730 series - Paper Jams; Paper Feeds at a Slant; Several Sheets of Paper Are Fed at a Time; Original Does Not Feed in the ADF

& “Paper Handling Precautions” on page 42
& “Available Paper and Capacities” on page 43
& “List of Paper Type” on page 44
Paper Jams
Load paper in the correct direction, and slide the edge guides against the edges of the paper.
Related Information
& “Removing Jammed Paper” on page 176
& “Loading Paper in the Paper Cassette” on page 45
Paper Feeds at a Slant
Load paper in the correct direction, and slide the edge guides against the edges of the paper.
Related Information
& “Loading Paper in the Paper Cassette” on page 45
Several Sheets of Paper are Fed at a Time
When several sheets of paper are fed at a time during manual 2-sided printing, remove any paper which is loaded
in the printer before you reload the paper.
Original Does Not Feed in the ADF
❏ Use originals supported by the ADF.
❏ Load originals in the correct direction, and slide the ADF edge guides against the edges of the originals.
❏ Clean the inside of the ADF.
User's Guide
Solving Problems
177