Start Here
Read these instructions before using your product.
The illustrations show the WF-7720, but the steps are the same
for all models, unless otherwise specified.
Note for Spanish speakers/Nota para hispanohablantes:
Para obtener instrucciones de configuración en español, consulte la Guía
de instalación en www.epson.com/support/wf7710sp o
www.epson.com/support/wf7720sp (requiere una conexión a Internet).
1
Unpack
French control
panel stickers
Note: Do not open the ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
1 Remove all protective materials from the product.
2 Lift up the scanner unit and remove all protective materials
from inside the product.
3 Lower the scanner unit.
2
Turn on and configure
1 Connect the power cord to the back of the product and to
an electrical outlet.
Caution: Do not connect to your computer yet.
2 Raise the control panel and turn on the product.
3 Select your language, country, and time.
Note: You can change these settings later using the product’s
control panel. For more information, see the online User’s Guide.
3
Install ink cartridges
Caution: Keep the ink cartridges out the reach of children and do not
drink the ink.
1 Lift up the scanner unit and open the ink cartridge cover.
2 Gently shake the ink cartridges.
3 Unpack the ink cartridges.
WF-7710/WF-7720 Series
WF7710_7720_SH_E_CPD53883.indd 1
To Next Page
Need help?
General
