Epson XP-2150 Series - Lights and Printer Status

+
PIN Code Setup (WPS)
Hold down the
and buttons simultaneously to start PIN Code Setup (WPS).
+
Wi-Fi Direct (Simple AP) Setup
Hold down the
and buttons simultaneously to start Wi-Fi Direct (Simple AP) Setup.
+
Restore Default Network Settings
Turn the printer on while holding down the
button to restore the default network settings.
When the network settings are restored, the printer turns on and the network status lights ash
alternately.
+
Print Nozzle Check Pattern
Turn the printer on while holding down the
y button to print the nozzle check pattern.
Related Information
& “Making Wi-Fi Settings by PIN Code Setup (WPS)” on page 25
& “Making Wi-Fi Direct (Simple AP) Connection Settings” on page 26
& “Restoring the Network Settings from the Control Panel” on page 34
& “Checking and Cleaning the Print Head - Printer Buttons” on page 91
Lights and Printer Status
Lights on the control panel indicates the status of the printer.
Normal Status
: On
Light Status
The printer is connected to a wireless (Wi-Fi) network.
The printer is connected to a network in Wi-Fi Direct (Simple AP) mode.
Error Status
When an error occurs, the light turns on or
ashes.
Details of the error are displayed on the computer screen.
/ : On
/ : Flashing
Printer Basics > Control Panel > Lights and Printer Status
17