Epson XP-2150 Series - Temporarily Printing with Black Ink

7.
Close the scanner unit.
8.
Press the
y button.
Ink charging starts.
c
Important:
Aer installing the ink cartridge, the power and ink light will continues to ash while the printer is charging
ink. Do not turn o the printer during ink charging. Charging takes approximately two minutes. If the ink
charging is incomplete, you may not be able to print.
Note:
If the
B light does not turn o, try removing and reinserting the ink cartridge.
Related Information
& “Ink Cartridge Codes” on page 76
& “Ink Cartridge Handling Precautions” on page 77
Temporarily Printing with Black Ink
When color ink is expended and black ink still remains when printing from a computer, you can use the following
settings to continue printing for a short time using only black ink.
❏ Type of paper: plain papers, Envelope
❏ Color: Grayscale
❏ Borderless: Not selected
❏ EPSON Status Monitor 3: Enabled (for Windows only)
Because this feature is only available for approximately ve days, replace the expended ink cartridge as soon as
possible.
Replacing Ink Cartridges > Temporarily Printing with Black Ink
87