❏ Pre-punched paper
Note:
❏ Load a single sheet of paper without binding holes at the top or the bottom.
❏ Adjust the print position of your le to avoid printing over the holes.
4.
Slide the edge guide to the edge of the paper, and then close the feeder guard.
5.
Slide out the output tray.
Note:
Return the remaining paper to its package. If you leave it in the printer, the paper may curl or the print quality may
decline.
Related Information
& “Paper Handling Precautions” on page 35
Loading Paper
>
Loading Paper in the Rear Paper Feed
40
To Next Page
Loading...
