EasyManua.ls Logo

Epson XP-332 - Printing on 2-Sides (Windows)

Epson XP-332
125 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
& “List of Paper Types” on page 21
Printing on 2-Sides (for Windows only)
e printer driver prints automatically separating even pages and odd pages. When the printer has nished
printing the odd pages, ip the paper over following the instructions to print the even pages. You can also print a
booklet that can be created by folding the printout.
Note:
❏ is feature is not available for borderless printing.
❏ If you do not use paper that is suitable for 2-sided printing, the print quality may decline and paper jams may occur.
❏ Depending on the paper and the data, ink may bleed through to the other side of the paper.
❏ If EPSON Status Monitor 3 is disabled, access the printer driver, click Extended Settings on the Maintenance tab, and
then select Enable EPSON Status Monitor 3.
❏ 2-sided printing may not be available when the printer is accessed over a network or is used as a shared printer.
1. Load paper in the printer.
2.
Open the le you want to print.
3. Access the printer driver window.
4. Select Manual (Long-edge binding) or Manual (Short-edge binding) from 2-Sided Printing on the Main
tab.
5. Click Settings, make the appropriate settings, and then click OK.
Note:
To print as a booklet, select Booklet.
6. Set the other items on the Main and More Options tabs as necessary, and then click OK.
7. Click Print.
When the rst side has nished printing, a pop-up window is displayed on the computer. Follow the on-screen
instructions.
User's Guide
Printing
36

Table of Contents